- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
10-09-2011 09:09 PM
Hello,
We have two PAN-2020 appliance running with 4.0.5 and setup for active/standby HA. We would like to change our HA setup to active/active instead of active/standby. In our existing setup we have two interfaces configured for virtual wire and one is setup as layer 3 interface for captive portal. If we change the active/standby setup to active/active do we have to set floating IPs for the Layer 3 captive portal interface? Any help would be much appreciated.
10-10-2011 10:23 AM
Hello Ahmed,
For Active/Active setup, I would suggest contacting your reseller to assist with implementation in your environment. In the interim, you can take a look at the config setup for A/A.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!