HA Active/Passive with Preemption

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

HA Active/Passive with Preemption

L2 Linker

2 firewalls configured with HA active/passive, And enabled preempt on both of firewalls

Everythings find, can synchronize configuration and session

 

firewall-A is active-firewall with priority 100

firewall-B is passive-firewall with priority 120

HA timer settings is recommended

 

But when I was testing for HA switch over by unplugged a interface on Active firewall (firewall-A), firewall-A moves into passive state, then active state again then passive state finally moves into "Preempt loop detected",

 

Actually I know that it will switchover 3 times after change firewall-A to suspend state

 

Is that a normal situation? Why does firewall-A still need to preempt itself as a active firewall even I did not put cable back (port still down)?

 

2 REPLIES 2

L6 Presenter

Have you checked everything in this article by Palo Alto for such issues?

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClhJCAS

L2 Linker

Hi, I found a new useful ref:

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClcACAS

 

Seem when we choose shutdown mode, it will cause a preemt loop, solved by choose auto mode instead

but for layer2 environment should keep shutdown mode and disable preempt option

  • 3155 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!