ha2 keep alive

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

ha2 keep alive

L4 Transporter

Hi,

I am getting the below message  ,there is no specific interval (around  30 min) 

it  countinously happens from three days .

What is the action need to be taken 

 

HA Group 1: Local HA2 keep-alive up
04/15 14:57:47

HA Group 1: All HA2 keep-alives are down
04/15 14:57:39

HA Group 1: Local HA2 keep-alive down
04/15 14:57:39


 How do i begin the troubleshooting ?

This will cause any issue ? 

 

I could see the dataplane cpu going very high right after the  keep alive up ?

What exactly ha2 doing 

 

 

during this time , i can see the link ha2 is up 

Thanks

 

16 REPLIES 16

L6 Presenter

Hey,

 

You can find an answer by checking the page 8 of the below document:

 

https://live.paloaltonetworks.com/twzvq79624/attachments/twzvq79624/documentation_tkb/543/2/HA_Failo...

 

 

Hi,

 

 

the deployment is active active ,

 

Both PA  was showing the same error before the seondary pa rebooting

 

 

HA Group 1: Local HA2 keep-alive up
04/15 14:57:47

HA Group 1: All HA2 keep-alives are down
04/15 14:57:39

HA Group 1: Local HA2 keep-alive down  
04/15 14:57:39

 

after rebooting the secondary  showing the below logs  but the primary  showing  the same above .

 

 


HA Group 1: Local HA2 keep-alive down
04/15 18:24:40
HA Group 1: All HA2 keep-alives are down
    04/15 18:24:40
HA Group 1: Peer HA2 keep-alive down

I am monitoring the ha2  interface on switch side  , but there is no trace for link down status
    

Thanks

 

 

Hi,

 

I can't access this document, Please help us with a new one or a any suggestion?

 

Regards,

Sethupathi M

Hello Team,

 

I'm also getting same,

Problem description:

1)      Observed data plane under severe load message in the system logs.

2)      Within a second, got “All HA2 keep alives are down” message

3)      HA keep alives were down for exactly 4 seconds.

keepalive.PNG

Can anyone suggest what is the troubleshoot methods and how can I findout a RCA.?

Could you help us here.

 

Thanks & Regards,

Sethupathi M

@Sethupathi,

What ports are you utilizing for HA2? 


@BPry wrote:

@Sethupathi,

What ports are you utilizing for HA2? 


I was wondering the same.  What is your hardware type @Sethupathi  @simsim ?  If you're not using the dedicated HA2 port and the box is under heavy utilization the HA2 port and it's functionality will occur via the DP.  With the DP being under load it's possible HA functionality could be affected.

Hi Brandon,

 

I'm having PA-5050.

 

Regards,

Sethupathi M

Hello,

Ifthe two are not connected directly, i.e. something like a switch or router in between the two PAN's, I would suggest also setting up HA1 and HA2 backups as a best pratice.

 

Regards,

Hi Team,

 

Having dedicated HA ports and which is directly connected.

 

It has been noticed that , Total management plane consumed disk space i.e. root partition is almost full.

 

Filesystem            Size  Used Avail Use% Mounted on

/dev/md3              3.8G  3.3G  295M  92% /

/dev/md5              7.6G  4.1G  3.1G  58% /opt/pancfg

/dev/md6              3.8G  2.0G  1.7G  55% /opt/panrepo

tmpfs                 2.0G  116M  1.9G   6% /dev/shm

cgroup_root           2.0G     0  2.0G   0% /cgroup

/dev/md8              198G   44G  144G  24% /opt/panlogs

tmpfs                  12M     0   12M   0% /opt/pancfg/mgmt/lcaas/ssl/private

 

Note:I'm having  PA-5050

 

Could any one help us here.

 

Regards,

Sethupathi M

 

@Sethupathi,

I wouldn't be worried about the dev/md3 partition being at 92%, that wouldn't cause your HA issues at all. If you are utilizing the dedicated HA1 and HA2 ports and not configuring another interface as a high-availability interface, high dataplane utilization shouldn't cause the HA interfaces to drop out. I would open a ticket with TAC so they can look at the associated logs and see exactly what was going on at the time the interfaces dropped. 

Hi,

I'm seeing the same issue here. We have an active/passive 5250 cluster.

We are running PANOS8.1.9

All HA links are directly connected.
cluster node 1:

clipboard_image_1.png

cluster node 2:

clipboard_image_2.png

Is this a known issue?

 

Thanks

J

Hi @joris_vd,

 

Did you ever find a solution to the issue you mentioned? I'm currently running into a very similar issue with a 5050 active-passive cluster running on PAN-OS 8.1.10. We've been working with TAC for the past few days and haven't had any resolution. Any info would be much appreciated.

 

Thanks,

RT

Hi Ryan,

 

As it only happened once we closely kept monitoring the cluster behavior in case it would re-occur...but it didn't. No support ticket was opened.

I will keep you posted if it happens again. We are still running PANOS 8.1.9.

Please let me know the outcome of the support ticket.

 

Best regards

Joris

Hi Ryan

 

Did you guys found a resolution for this?

I see the same issue with PANOS 8.1.10 with a PA3220 A/P.

 

Regards

Fabian

  • 12747 Views
  • 16 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!