09-23-2013 09:57 AM
We have a cluster of two PA-5060 running in active-passive mode. Two 10G interfaces are configured as an aggregated interface. They are connected to two Avaya 8600 switches which are running SMLT. Whenever a failover happens, the aggregated interface fails. We have to unplug and re-plug in the cable to make the interface start working again. Shutting down the interfaces and re-activating them doesn't help. Anyone has similar experience?
09-23-2013 10:57 AM
This configuration is actually a Palo Alto Networks recommended deployment. If you are using 802.3ad for link aggregation, you should have no issues. I would suggest you open a case with support so that the issue can be tracked and hopefully resolved.
-chadd.
09-23-2013 11:55 AM
If this helps any, we have a client that has 2 x PA-5060 in HA with link aggregation with no issues running 5.0.4 the only difference is an active/active setup rather than active/passive
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
