07-25-2017 07:15 AM
Also configure at least 2 HA1 links to avoid split brain.
I usually configure management interface as HA1 backup.
07-25-2017 10:43 AM
... and make sure that you connect HA1 and Backup-HA1 to independent switches. If you connect both to the same network devices an they go down you'd still have a split brain problem
07-25-2017 12:29 PM
If firewalls are in same rack then connect HA1 ports directly and as mgmt ports see each other through switch anyway then configure mgmt interface as HA1 backup.
With this solution you don't have to burn dataplane port for HA1 backup plus mgmt port as HA1 backup sits on management plane not on data plane.
07-26-2017 06:10 AM
My PA's are in different building altogether. I was condidering using a fiber connection for the heartbeat not an ethernet connection to see if that helps
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
