01-18-2017 02:40 AM
Hi,
We are using Palo 3020 in our setup & are struggling with high BW utilization during certain period of times in our network. We are suspecting few users bypassing the policies & misusing internet during these periods.
Please advise if there is any report in Palo which can help us identify the user/s consuming maximum BW utilization during these periods.
01-18-2017 02:50 AM
the first place to look would be the ACC (Application Command Center) as it will be able to show you which applications are using the most resources and allow you to drill down into the details
All New Application Command Center
01-18-2017 03:34 AM
thanks Reaper,
I tried this, but it gives past performance with a minimum of 15 minutes time. What I need is the real time report of usage, one way is to capture the traffic & then identify the same, but I am sure there should be some better way of this.
01-18-2017 04:31 AM
well, one way to see live bandwith usage for a specific application is to enable QoS on an interface (no need for QoS policy) and look at the statistics:
Getting Started: Quality of Service
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
