how dose firewll to panorama log forwording?

[hchoi871101]

Hello.

I followed the video while watching it, and I want to send the log to the panorama server.

https://www.youtube.com/watch?v=B_ttlugnARE

The log is not being checked.

Is there a different setting to check the firewall log on the panorama server?

[PavelK]

Hello @hchoi871101

the video you referred to is covering Firewall part of the configuration. You still have to configure Panorama side.

Make sure, you set up log collector. If you have not done it, please refer to this documetation: https://docs.paloaltonetworks.com/panorama/10-1/panorama-admin/manage-log-collection/manage-collecto...

Make sure that Firewall is assigned to log collector group. Navigate to: Panorama > Collector Groups > [Collector Group Name] > Device Log Forwarding > Devices > Modify > Then add Firewall and click ok.

After you complete this change, commit to Panorama and also push this to collector group by going to: Commit > Push to devices > Edit > Collect Groups > Select Collector Group and click OK.

 After these steps, you will be able to see all the logs that Firewall is sending under Monitor > Logs.

In the case, you still not see logs, make sure that both Firewall and Panorama have the same time / time zone set.

Kind Regards

Pavel