09-22-2022 12:00 AM
I followed the video while watching it, and I want to send the log to the panorama server.
The log is not being checked.
Is there a different setting to check the firewall log on the panorama server?
09-22-2022 04:35 AM
the video you referred to is covering Firewall part of the configuration. You still have to configure Panorama side.
Make sure, you set up log collector. If you have not done it, please refer to this documetation: https://docs.paloaltonetworks.com/panorama/10-1/panorama-admin/manage-log-collection/manage-collecto...
Make sure that Firewall is assigned to log collector group. Navigate to: Panorama > Collector Groups > [Collector Group Name] > Device Log Forwarding > Devices > Modify > Then add Firewall and click ok.
After you complete this change, commit to Panorama and also push this to collector group by going to: Commit > Push to devices > Edit > Collect Groups > Select Collector Group and click OK.
After these steps, you will be able to see all the logs that Firewall is sending under Monitor > Logs.
In the case, you still not see logs, make sure that both Firewall and Panorama have the same time / time zone set.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!