04-30-2019 05:50 PM
We have ipsec tunnel to vendor.
web gui shows phase 1 as down and phase 2 as up.
i can ping across the vendor network.
traffic is passing via tunnel
show vpn flow shows active.
need to know how long web gui will show phase 1 is red?
when web gui will show phase 1 as green?
Also from cli below command does not show that phase 1 is down?
show vpn ike-sa gateway name
04-30-2019 06:07 PM
This is the expected behavior. The IKE Gateway (or phase1) is only negotiated to help set up a secure process of negotiating the actual IPSec Tunnel (or phase2). The IKE Gateway will show red when Phase1 times out; prior to phase2 timing out, phase1 will re-negotiate and perform the necessary re-key. After the new negotiation, the IKE Gateway will show green until it ages out again, and goes back to red.
04-30-2019 06:07 PM
This is the expected behavior. The IKE Gateway (or phase1) is only negotiated to help set up a secure process of negotiating the actual IPSec Tunnel (or phase2). The IKE Gateway will show red when Phase1 times out; prior to phase2 timing out, phase1 will re-negotiate and perform the necessary re-key. After the new negotiation, the IKE Gateway will show green until it ages out again, and goes back to red.
04-30-2019 06:10 PM
Many thanks for solving this mystery
Great to learn from this community
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
