How to add a device serial number to Panorama through the CLI?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

How to add a device serial number to Panorama through the CLI?

L2 Linker

I see how you can replace an existing serial number with a new one through the CLI but can find nothing on how to just add a new device serial number to Panorama through the CLI. Anyone done this before or have an idea?

3 REPLIES 3

L5 Sessionator

replace device old <> new <>

 

Hope this helps!

But I am not replacing an old device. I am just adding new. I tried just leaving out the old but it won't accept that command.

To add a new device from cli do as following:

 

Panorama>configure

Panorama#set mgt-config devices <>

 

set mgt-config devices <>  ==> this is the command.

  • 8820 Views
  • 3 replies
  • 0 Likes
  • 101 Subscriptions
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!