How to check VLAN untagged on ae interface and physical interface with L3 subinterface

cancel
Showing results for 
Search instead for 
Did you mean: 

How to check VLAN untagged on ae interface and physical interface with L3 subinterface

L2 Linker

Hello all,

We would like to proceed with the connection between Cisco ACI and Paloalto firewall regarding this server configuration change.
 
Is there a difference in how to check the VLAN untagged of the Ae interface with L3 subinterface and the physical interface?

 

- If you connect the physical interface (eth1/5) separately from the current Cisco ACI, you can communicate normally.

 

- If you connect through Ae2 interface, there is no communication, and it seems to be a Vlan tagging issue.

Regards,

1 REPLY 1

Cyber Elite
Cyber Elite

Hi @JoHyeonJae ,

It is not very clear what is your question, at least for me.

Can you please try to explain again? Are you able to provide config snippets, screenshots, draws of what you are trying to achive and what probable are you facing?

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!