How to configure IPv6 advertising on PAN-OS 4.0.4?


Changes to the LIVEcommunity experience are coming soon... Here's what you need to know.

Not applicable

How to configure IPv6 advertising on PAN-OS 4.0.4?

I've set up a global IPv6 address on my interface on PA-2050 btu I can't find any place to advertise the network and router - info to the clients. How can I set up this?


Tags (3)
Palo Alto Networks Guru

Hi Hankim,

In PAN-OS 4.0 we do not support router advertisement messages on our layer 3 interfaces (VLAN, L3, L3 subinterface).  So at this time you can only use static addressing to point to the firewall as the default gateway.  We will be addressing this in a future release.



View solution in original post

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!