Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
08-04-2016 10:37 PM
Hi there,
I'm trying to filter the rules via subnet. Is this possible ? I've tried copying (addr in '10.10.10.0/24') from a working log filter search and that doesn't seem to work. There's no filter builder like the log search box so i can just use that to figure this out. This is not very intuative.
is it even possible to filter rules by Subnet or host IP address ?
08-05-2016 02:26 AM - edited 08-05-2016 02:27 AM
Hi
The search filter in the security policy is object based and can only be used to search for a string rather than a logical subnet
Instead of the 'addr in' you can use (source/member contains '10.10.10.') to look for a string match that corresponds to your subnet, this will however not include matches where the address field is 'any'
hope this helps
08-05-2016 08:53 AM
You could also try a search in the CLI, probably easier using the set CLI output. Not as convenient as the GUI but should work also.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
