- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
02-17-2015 04:59 PM
Hi,
I can send test email from GUI as below
How can I send same test email by CLI?
One of my customer does not allow me to use GUI, so I need to know this test command.
I could not find command under 'test' and 'request'
Cheers
02-17-2015 11:50 PM
Hello Emr,
There is a way to send test email from root. You may contact with PAN TAC, since customer will not have root access to the firewall.
Thanks
02-17-2015 05:43 PM
Hi Emr,
you can find an example using the cli here.
It's a bit tricky to use telnet on port 25 but it does the job
Troubleshooting E-mail Alerts and Reports Generated from PAN-OS Devices
Hope this helps
02-17-2015 11:43 PM
Thanks for suggestion, though there is no telnet cmd on the latest PAN-OS anymore...
02-17-2015 11:50 PM
Hello Emr,
There is a way to send test email from root. You may contact with PAN TAC, since customer will not have root access to the firewall.
Thanks
02-18-2015 12:04 AM
Hi HULK,
Thank you for reply. Okay...sounds I can't send test e-mail by myself.
I'll contact tac when I need.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!