01-29-2018 08:32 PM
Dear Brothers,
Anyone to know how to set the QoS on Ethernet 1/7 Port to monitor ALL Incoming and Outgoing Traffic.
Existing we using the PA-3020 and PA-500 in our environment.
Thanks & Regards,
James
01-30-2018 12:21 AM
Hi James
QoS is applied to the egress interface, so QoS applied to eth1/7 will only apply to packets leaving that interface, anything uploaded to egresses out of a different interface will require a profile on that interface as well
please check out this article: https://live.paloaltonetworks.com/t5/Featured-Articles/Getting-Started-Quality-of-Service/ta-p/68633
01-30-2018 12:21 AM
Hi James
QoS is applied to the egress interface, so QoS applied to eth1/7 will only apply to packets leaving that interface, anything uploaded to egresses out of a different interface will require a profile on that interface as well
please check out this article: https://live.paloaltonetworks.com/t5/Featured-Articles/Getting-Started-Quality-of-Service/ta-p/68633
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
