How to set the QoS on Ethernet Port for Incoming and Outgoing Traffic

cancel
Showing results for 
Search instead for 
Did you mean: 

How to set the QoS on Ethernet Port for Incoming and Outgoing Traffic

L2 Linker

Dear Brothers,

 

Anyone to know how to set the QoS on Ethernet 1/7 Port to monitor ALL Incoming and Outgoing Traffic.

 

Existing we using the PA-3020 and PA-500 in our environment.

 

Thanks & Regards,

James

 

1 ACCEPTED SOLUTION

Accepted Solutions

L7 Applicator

Hi James

 

QoS is applied to the egress interface, so QoS applied to eth1/7 will only apply to packets leaving that interface, anything uploaded to egresses out of a different interface will require a profile on that interface as well

 

please check out this article: https://live.paloaltonetworks.com/t5/Featured-Articles/Getting-Started-Quality-of-Service/ta-p/68633

Tom Piens
PANgurus

View solution in original post

1 REPLY 1

L7 Applicator

Hi James

 

QoS is applied to the egress interface, so QoS applied to eth1/7 will only apply to packets leaving that interface, anything uploaded to egresses out of a different interface will require a profile on that interface as well

 

please check out this article: https://live.paloaltonetworks.com/t5/Featured-Articles/Getting-Started-Quality-of-Service/ta-p/68633

Tom Piens
PANgurus

View solution in original post

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!