I already have two firewalls to set HA and use Active / Passive mode.
But when I put both devices into the same Device Groups and Templates and push the configuration file to both devices, the HA settings of the second device will be overwritten by the HA settings of the first device.
I saw this "Migrate a Firewall HA Pair to Panorama Management"
It mentioned that it seems to set variables
Please help me.
I would configure the HA config locally on the devices and not in the template on panorama. This way you will have a lot less troubles. Some of the HA config you can configure in panorama with different device specific templates so that both devices have different configurations, but at least the HA IP addresses you must configure locally on the device (https://docs.paloaltonetworks.com/panorama/9-0/panorama-admin/manage-firewalls/manage-templates-and-...) so I recommend to simply configure HA completely local.
We are creating template stacks, one dedicated stack per node
1) node specific template
2) system specific template
3) general template
In the node specific themplate the HA settings are set. Everything else is configured in the system specific template. This ensures that no config (except mgn interface related one) needs to be done on the firewall nodes, everything is managed by panorama.
@JoergSchuetter how did you manage to configure the HA IP adresses in a template on panorama? I would also prefer to use the template for everything but because of the HA IP addresses there was such a mess that I simply changed to configure everything HA related locally.
After I managed the device from panorama,
I used the same template and device group for both HA devices, and set all HA configs of this template to variables, and manually set the HA settings locally on the passive device, which works normally!
Thanks for sharing. In this case I will give it another try.
The question now is why does paloalto write in the adminguide that IP addresses of HA firewalls can only be configured locally ... @kiwi do you may have the answer?
Edit: @JoergSchuetter what PAN-OS version do you use? When I configure the HA IPs in panorama template stack, they are not applied to the firewall. All the HA config works, but when I check locally on the firewall the IPs aren't from the template...
@vsys_remo : We are using this template stack since version 8.0 (works well with 8.1 and 9.0).
One initial step is to clean up the local stored config:
delete zone trust
delete zone untrust
delete network virtual-wire default-vwire
delete network interface
delete network tunnel
delete network ike
delete network virtual-router default
delete deviceconfig system update-schedule
delete deviceconfig high-availability
delete deviceconfig system timezone
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!