08-26-2010 05:19 AM
Hi,
Whene triying to configure tow interfaces(eth1/17 and eth1/18) on a PAN-4020 device in an aggregate interface the interface eth1/18 never goes up. Whene switching the same cable on the eth1/19 all things works well. I have incountred this problem on tow PAN 4020 devices always the issue is with the eth1/18 if. I'am using PAN-OS 3.0.10.
Any idea please?
Regard's
08-26-2010 08:58 PM
Arnaud Bresnard has opened case 20173 for this issue. Can you send a tech support so we can analayze your interface configuration?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
