Internet Bandwidth comsumed, who?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Internet Bandwidth comsumed, who?

L3 Networker

Hello Team,

                 Firstly, thank you all for your cooperation.

I have an issue that is I have my internet connection fully utilized most of the time.

is there a way or work arround to find out which host IP is utilizing the bandwidth, knowing that I am not running the SD-Wan.

software version 11.1.2-h3

TIA,

MR
1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

The default view of the ACC should tell you that quite quickly

 

On the top left corner, set the desired timeframe (default is last hour), and then in the Network Activity tab (first default tab) scroll down until you see the Source IP Activity

It'll show you the top 10 most active sources (and to the right, the top 10 destinations)

 

 

If you want more detail you can always create a custom report and sort on bytes

 

reaper_0-1726653661674.png

 

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

View solution in original post

3 REPLIES 3

Cyber Elite
Cyber Elite

The default view of the ACC should tell you that quite quickly

 

On the top left corner, set the desired timeframe (default is last hour), and then in the Network Activity tab (first default tab) scroll down until you see the Source IP Activity

It'll show you the top 10 most active sources (and to the right, the top 10 destinations)

 

 

If you want more detail you can always create a custom report and sort on bytes

 

reaper_0-1726653661674.png

 

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

L6 Presenter

@MRamadanAHafiez wrote:

Hello Team,

                 Firstly, thank you all for your cooperation.

I have an issue that is I have my internet connection fully utilized most of the time.

is there a way or work arround to find out which host IP is utilizing the bandwidth, knowing that I am not running the SD-Wan.

software version 11.1.2-h3

TIA,


The only way to see who/what is using a link's bandwidth is through netflow or looking at the actual interface.  Even looking at ACC or creating a report on top bytes sent/received does NOT necessarily give you a point in time X host consumed Y amount of bandwidth on your circuit.  The closest is to have QoS enabled on your firewall and looking at the statistics that way.  Like this:

Brandon_Wertz_0-1726669721989.png

 

 

From this view you can look deeper into source clients / applications being used at a given moment. 

 

The problem with looking at cumulative bytes sent/received is that it's cumulative over a defined period of time.  So if the the total bytes sent/received was 10GB the rate, or Gbps/Mbps, of that transfer will need to be a manual calculation by you.  You will need to look at the session data and will have to divide the amount of traffic by the seconds of the session then do the link speed conversion as well.

OR you will need to have some other source monitoring and calculating what traffic was consuming a link.

L3 Networker

Thank you so much @reaper and @Brandon_Wertz , was really helpful your resplies.

MR
  • 1 accepted solution
  • 453 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!