ION to ION (hub's) Standard VPN with BGP, route filtered and not reachable

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

ION to ION (hub's) Standard VPN with BGP, route filtered and not reachable

L1 Bithead

 

I have a Hub to Hub standard VPN to connect the two together in place of a MPLS. The are peered with a Classic BGP session, site one sending a /20 prefix it has learned from it's core router. Site two sees that from the BGP Peer, but the route will not install, just shows in the filtered section, not the reachable.

The next hop is site 1's end of the VPN tunnel, which is clearly reachable as the BGP session is up.

Not a lot of docs on how to debug this reachability issue.

 

 

1 REPLY 1

Community Team Member

Hi @nellson ,

 

Here is a KB on BGP config and troubleshooting. Hope this helps!

LIVEcommunity team member
Stay Secure,
Jay
Don't forget to Like items if a post is helpful to you!

Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.
  • 568 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!