01-19-2024 04:42 PM
I have a Hub to Hub standard VPN to connect the two together in place of a MPLS. The are peered with a Classic BGP session, site one sending a /20 prefix it has learned from it's core router. Site two sees that from the BGP Peer, but the route will not install, just shows in the filtered section, not the reachable.
The next hop is site 1's end of the VPN tunnel, which is clearly reachable as the BGP session is up.
Not a lot of docs on how to debug this reachability issue.
01-24-2024 09:38 AM
Hi @nellson ,
Here is a KB on BGP config and troubleshooting. Hope this helps!
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
