I'm testing Starlink business and having issues passing traffic over my tunnel. This remote site connects to our data center via an IPsec tunnel. I can get the tunnel up and traceroute to the remote side of the tunnel, but I'm unable to pass traffic. I have "Enable NAT Traversal" selected on my IKE Gateway. The Starlink is set to IP passthrough.
Any help would be appreciated.
Check firewall policies on both sides if they permit traffic to/from tunnel zone.
Can you share screenshot of working and not working traffic log from both sides and have at least those columns visible.
Thank you for your response. Both sides have policies that permit traffic to/from the tunnel zone. I have another circuit that works with no issues at this site. However, when getting the screenshots you requested I noticed that on Starlink most of the traffic goes Interzone-default policy and is denied.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!