IPSEC ON SECONDARY ADDRESSES

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

IPSEC ON SECONDARY ADDRESSES

L3 Networker

Hello,

just a little question it is possible to terminate a vpn-ipsec with a secondary adresses on external interface or I must use the main interface?

thks,

ALex

1 accepted solution

Accepted Solutions

L5 Sessionator

Hello Alex,

I'm quite sure I've done this in the past without issues. Assuming your IKE Gateway configuration has the secondary IP address chosen, and all of the packets are able to route normally, it should be fine. The rest of the configuration should use your tunnel interface.

If you have any issues with this, give us a call and we can open up a ticket.

Thanks,

Jason Seals

View solution in original post

3 REPLIES 3

L5 Sessionator

Hello Alex,

I'm quite sure I've done this in the past without issues. Assuming your IKE Gateway configuration has the secondary IP address chosen, and all of the packets are able to route normally, it should be fine. The rest of the configuration should use your tunnel interface.

If you have any issues with this, give us a call and we can open up a ticket.

Thanks,

Jason Seals

thanks,

Christophe Viaud from PAlo-alto confirm this feature,

regards,

Hi If we want to use 2 ISP and one isp for tunnel and other for local internet can we do that

 

  • 1 accepted solution
  • 3948 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!