03-21-2012 06:58 AM
Hello,
just a little question it is possible to terminate a vpn-ipsec with a secondary adresses on external interface or I must use the main interface?
thks,
ALex
03-21-2012 09:56 PM
Hello Alex,
I'm quite sure I've done this in the past without issues. Assuming your IKE Gateway configuration has the secondary IP address chosen, and all of the packets are able to route normally, it should be fine. The rest of the configuration should use your tunnel interface.
If you have any issues with this, give us a call and we can open up a ticket.
Thanks,
Jason Seals
03-21-2012 09:56 PM
Hello Alex,
I'm quite sure I've done this in the past without issues. Assuming your IKE Gateway configuration has the secondary IP address chosen, and all of the packets are able to route normally, it should be fine. The rest of the configuration should use your tunnel interface.
If you have any issues with this, give us a call and we can open up a ticket.
Thanks,
Jason Seals
03-22-2012 07:10 AM
thanks,
Christophe Viaud from PAlo-alto confirm this feature,
regards,
12-23-2021 05:29 AM
Hi If we want to use 2 ISP and one isp for tunnel and other for local internet can we do that
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
