IPSEC WITH PBF

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

IPSEC WITH PBF

L3 Networker

     Hi guys ,

I dont know what happens but when i use pbf on my isp`s , my ipsec vpn don`t traffic......

what can be?

best regards.

1 REPLY 1

L3 Networker

Hello,

Anything originating from or to the PAN interface directly will not match PBF and will always use vr routing table.Since the IPSEC negotiation is done via the external interfaces it might have been the problem with your case where the request was going through the ISP mentioned in the routing table and the reply from the other ISP the below document explains it in detail:

Hope this document helps you.it explains the problems you run into and how to resolve them.Tunnel traffic and traffic originating from the PAN interface directly do not lookup PBF rules and will always follow VR.This is by design.The document specifies how the configurations can be made to get around this problems by configuring two virtual routers.

Kindly give it a try and get back to us if you have any more questions or if you run into any problems.

Regards,

Yashwanth Bommakanti

  • 1819 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!