IPv4 Processor receive cidr and output single address

[mchartier]

Hi folks, 

Actually I can create a miner that pull an IPv4 list, send it to the processor and to the output. The output is always in that format:

1.1.1.1-1.1.1.1 (for an entry in the list with a single ip)

2.2.2.0-2.2.2.255 (for an entry with a subnet)

Is it possible to acheive this instead :

1.1.1.1

2.2.2.1

2.2.2.2

2.2.2.3

2.2.2.4 and so on...

Thanks!

[ehelm]

Bumping this... did you ever figure out how to do it? I'd also like to either keep the format from the external feed list or output in CIDR format instead of a range. 

Found this that may help... works great for my needs.

 https://live.paloaltonetworks.com/t5/MineMeld-Articles/Parameters-for-the-output-feeds/ta-p/146170

[Scott127]

I am not sure why the link above does not lead to the actual post, but I did find this. If you append ?tr=1 on the end of the URL for the range list, it will change the format to CIDR.