05-31-2011 01:13 AM
Hello,
We are running a PA-500 with version 4.0.2 and I noticed something strange today when adding a IPv6 address to a L3 subinterface.
This L3 subinterface already got a IPv4 address.
After doing the commit and when it almost finishes around 98% all connections to the network and all traffic going through the PA is dropped for some seconds. I think around 20 sec.
This includes all IPv4 traffic and even the connection to the IP used on the management port which I use.
Is this normal behavior?
BTW, it's the same when I remove the IPv6 address from the subinterface. Around 98% all traffic seems to stop for some seconds.
Jo Christian
06-07-2011 03:55 AM
I have opened a case but getting no response 
Case number: 00039615
Jo Christian
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
