07-22-2020 09:16 AM
Dear community,
I configured Windows 10 vpn client to connect to the globalprotect gateway and it works fine, the only thing that it´s not working is split tunneling.
Cannot see the Access Route For Third Party Client on the gateway like this example:
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClIDCA0
Then checking the documentation it seems like the Windows VPN client is not supported:
This could explain some of the features not working fine.
Could someone confirm if globalprotect with windows vpn client and split tunnel should work?
Thank you in advance!
07-22-2020 12:43 PM
Split tunnel isn't an option unless it's supported through the client you are using paired with x-auth. Likewise the option that you are talking about depends on the IPSec setup sent by the client connecting to the firewall, not the firewall itself.
07-23-2020 09:17 AM - edited 07-23-2020 02:39 PM
I am using split-tunnel and GlobalProtect app with Windows 10, Android, and IOS. I have Enable IPSec checked. I do not have Enable X-Auth Support checked.
07-23-2020 02:34 PM
Hello,
As @BPry mentioned, its not possible since the client does not support it. I would suggest to use the GlobalProtect client. Also there is a reason most companies are going away from split tunnel, you lose visibility into what your clients are trying to access and you cannot protect them as well.
Regards,
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
