ISE syslog for UserID

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

ISE syslog for UserID

L2 Linker

I am trying to parse ISE RADIUS logs to help map wireless users to IP addresses. I have the Palo configured as follows but I am not getting any info from ISE. I am not that familiar with ISE and did not set up that end but have been told that ISE is sending the RADIUS Accounting logs to the management interface of the firewall.

 

 

IISE settings.PNG

I have UserID and UserID syslog enabled on the Palo managment interface.

 

Any ideas as to why I am not seeing traffic or how I should have ISE set up. It is ISE 1.3

 

1 REPLY 1

L6 Presenter

This is what I've got:

 

ISE Syslog.JPG

  • 2730 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!