Issue with LACP in VirtualWire

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Issue with LACP in VirtualWire

L4 Transporter

 

any idea? 

 

4 REPLIES 4

L6 Presenter

@BigPalo,

 

What is Passive Link status under High-Availability --> Active/Passive Settings.

Is it shutdown or auto ?

 

- Mayur

M

Check out my YouTube channel - https://www.youtube.com/@NetworkTalks

Auto. 

 

in the current version 8.0.7, the interfaces in nexus connected to PA VirtualWire interfaces are up. But when we upgrade the passive node to 8.1.10 the inferfaces in the nexus change to down and we can no get up. Its weird....

 

@BigPalo,

 

I think, it seems to be known issue on 8.1.x and it is resolved in 8.1.2. It is related to AE interface with LACP is enabled. There is also workaround given for this issue.

 

Please check below link.

 

https://docs.paloaltonetworks.com/pan-os/8-1/pan-os-release-notes/pan-os-8-1-release-information/kno...

 

Hope this helps !

 

Mayur

 

 

M

Check out my YouTube channel - https://www.youtube.com/@NetworkTalks

But the issue here is when PA reboots. We dont do any action in Nexus.

Pa is upgraded to version 8.1.x and interfaces in nexus connected to VW  Pa int dont come upb

We tried to upgrade to 8.1.3, 8.1.10 and 8.1.3 and the behaviour was the same.

  • 3014 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!