07-11-2014 12:24 PM
Is there any documentation about how to configure a LAGG interface in PAN-OS 6.0?
I’ve read through the administrators guide, and did a search on the PA documentation web site, and I couldn’t find anything.
Thank you!
--
Rick
07-11-2014 05:08 PM
There is no PanOS 6 specific documentation for the Aggregate Ethernet implementation. These documents are recently updated showing what is support and not and how they appear when you create the AE in the web interface. Support for AE is limited in scope.
Which Link Aggregation Protocols are Supported?
Aggregate Ethernet Interface Link Status Behavior
edited: to correct link.
07-11-2014 05:11 PM
Hi Rick,
Palo Alto Does support LAGG, I didnt find any specific document for LAGG config. However any of the document specified in bellow link will be helpful.
PAN-OS 6.0 Web Interface Reference Guide (English)
Look for word "aggregate" and not LAGG, you will find correct information.
Also try following link for additional information.
https://live.paloaltonetworks.com/search.jspa?q=link+aggregation&type=document
Regards.
Hardik Shah
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
