02-27-2013 08:28 PM
is there a way to implement a load balance in our outbound connection using just 1 appliance?
02-27-2013 09:41 PM
Load-Balancing is not supported on PA platforms.You can implement Policy Based Forwarding to route certain traffic based on Network address/Applications etc thorugh a secondary Outbound connection.
-Ameya
02-27-2013 09:41 PM
Load-Balancing is not supported on PA platforms.You can implement Policy Based Forwarding to route certain traffic based on Network address/Applications etc thorugh a secondary Outbound connection.
-Ameya
02-27-2013 11:28 PM
What about ECMP (Equal Cost Multi Path routing)?
Thats when you have two (or more) entries in your routingtable with the same metric/cost for a given dstip/range.
02-27-2013 11:42 PM
ECMP is not supported at this time. Only a single best path is installed in the forwarding table from the routing table.
03-19-2013 04:52 PM
Will there be a possibility that PA will support this in the future?
03-26-2013 11:00 AM
I would suggest discussing this question with your SE,since they have more insight on the various Enhance requests.
-Ameya
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
