Log collector drive bays question

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Log collector drive bays question

L1 Bithead

Hey all,

I need to replace a disk on a Palo Alto M600 log collectorScreenshot 2022-01-12 at 11.09.51.png There are no disk labels on the device. Could anybody here confirm which bays are A1/A2 and B1/B2? I've attached a photo. I'm guessing A1 starts the top left but I' not sure.

 

#m600

1 accepted solution

Accepted Solutions

L6 Presenter

As per M-200 they are from left to to right A1/A2/B1/B2 so the same should apply for M-600 as you have shown on the picture.

View solution in original post

3 REPLIES 3

L6 Presenter

It should be from the left One After another as they are in 2 disk raid (a1, a2, b1,b2):

 

 

M-600 Appliance Front Panel Description (paloaltonetworks.com)

 

Log Collector RAID Disk Settings (paloaltonetworks.com)

Screenshot 2022-01-12 at 11.09.51.png

Ive added where I think A1 & B1 might be. Could you confirm?

L6 Presenter

As per M-200 they are from left to to right A1/A2/B1/B2 so the same should apply for M-600 as you have shown on the picture.

  • 1 accepted solution
  • 2131 Views
  • 3 replies
  • 0 Likes
  • 101 Subscriptions
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!