02-01-2023 05:04 AM
Hey,
I'm using PaloAlto PA440 and I'd like to forward logs to syslog, but I don't use dedicated management (MGMT) port for administration. I configured log forwarding, but it does not work. Do I need to use dedicated management port to send logs? Is it possible to configure log forwarding on any port?
Thank You!
02-01-2023 05:58 AM
Hi @yonkerro ,
You will need to setup a service route for syslog under Device > Setup > Services > Service Route Configuration. If you do not have a management interfaces, you should change the service route for all services. If you have already done that, then verify the security policy is not blocking the traffic. You should see the syslog in the traffic logs.
Thanks,
Tom
02-01-2023 05:58 AM
Hi @yonkerro ,
You will need to setup a service route for syslog under Device > Setup > Services > Service Route Configuration. If you do not have a management interfaces, you should change the service route for all services. If you have already done that, then verify the security policy is not blocking the traffic. You should see the syslog in the traffic logs.
Thanks,
Tom
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
