M200 raid disk pair status stucked at 0%

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

M200 raid disk pair status stucked at 0%

L3 Networker

To enable the disk A ,we have run the below command

request system raid add A1
and after 5 min run below command :
request system raid add A2

 But disk is not enabled. Status is stuck at 0% since last 6 hours.

Deepak_K_0-1612969567576.png

 

How we can resolve this issue ?

1 accepted solution

Accepted Solutions

Yes , this is a new setup.

Now status is completed. It took 24 hours build disk pair A.

View solution in original post

2 REPLIES 2

L7 Applicator

I am curious if there has been any change. 

I am also assuming this was a new setup?

LIVEcommunity team member
Stay Secure,
Joe
Don't forget to Like items if a post is helpful to you!

Yes , this is a new setup.

Now status is completed. It took 24 hours build disk pair A.

  • 1 accepted solution
  • 2382 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!