MAC Destination Problem (4.0.4)

Showing results for 
Search instead for 
Did you mean: 

MAC Destination Problem (4.0.4)

L1 Bithead

We have a new pair of PA-2050 (HA).

The last two weeks works fine with 4.0.1 but last Thursday I upgraded them to 4.0.4 and two of our networks had problems to go trought the firewalls.

I saw in the traffic monitor that the rules were ok and that traffic were allowed, but the response not reach any equipments of that network.

Then i use wireshark and saw thath the mac destination from the firewall was 00:00:00:00:00:00, the packet that go into the PA interface was correct (with origin and destination MAC) but the response had the correct source MAC but incorrect destination MAC.

I solved it with a downgrade to 4.0.1.


L3 Networker

Hello, If you open a case with Support we can take it up with engineering to fix the issue.


Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!