I have two PaloAlto 850's in HA. I am unable to ping or reach the secondary/standby webgui. Both are connected to the same switch, when looking at the switch CAM table the secondary MGMT interface is not getting populated with the FW MAC address. Being that the switch is not recieving a frame from the FW to populate the CAM table I have tried the following: I have swapped out cables, interfaces on the switch and rebooted the FW multiple times.
Has anyone else ran into this issue or may have a suggestion?
Just to make sure, both the active and standby PAN's have different management IP's? Do the vlans on the switch match the IP subnets of the PAN's?
The management interface should always have a light and be accessible even if it is the standby HA pair.
Just thinking out loud.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!