Management interface woes

[wstuart]

I only have fiber available at the firewall location. I am using the inside interface to do management (port 13).  I have configured a management profile and am able to HTTPS, SSH, and PING to that interface.

I have also configured the Service Route Configuration to use the inside interface (with a handful outside).

When I attempt to use the cli command:

"scp import configuration from"

I get "Route not found".  I suspect it is because it is attempting to use the management interface that is not connected.  As a troubleshooting step, I set all of the "Service Routes" to "Inside" to see if there was a service route to govern what interface scp uses, but apparently not.

Is there a way to configure the firewall to use one of the fiber ports as the default management port or force scp to use another route?

[PavelK · Accepted solution]

Hello @wstuart

I can see in help an option to set "source-ip" (Set source address to specified interface address).

Could you try: "scp import configuration source-ip <Data Plane Interface IP address> from"

Kind Regards

Pavel

[wstuart]

Thank you!  Somehow I missed that.  It appears to be working.