Montioring DHCP with ManageEngine

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Montioring DHCP with ManageEngine

L1 Bithead

Hello all.  We are demoing ManageEngine's OpUtils which advertises it can monitor Palo Alto DHCP scopes.  I have it connecting to one of our palos via Web API credentials just fine, it just doesnt return any data about the DHCP that is configured.  I was curious if anyone had any advice on special configuration needed or special permissions?  If has experienced anything similar?

 



Please note you are posting a public message where community members and experts can provide assistance. Sharing private information such as serial numbers or company information is not recommended.
1 REPLY 1

Cyber Elite
Cyber Elite

Hello,

I would suggest using snmpv3 instead if you can.

Just a thought.

Regards,

  • 1218 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!