Multicast configuration for IPTV

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Multicast configuration for IPTV

L2 Linker

Hi all,

I'm lost configuring my PA-500 for IPTV using multicast.

My provider has a new option for IPTV.

They stated that in order to test the configuration one should try to open:

https://www.fiber7.ch/documents/129/Big_Buck_Bunny_Stream.xspf

 

So far I was not able to get this to work.

I understand that one needs to enable multicast on the virtual router.

I enabled it for the internal interface with IGMP enabled.

Whenever I add the external interface with PIM enabled I get an error message when validating the configuration

Failed to get IP address for interface ethernet1/1. (Module: routed)

 

Any hints appreciated how to get IPTV with multicast to work.

 

Regards,

  Andreas

2 REPLIES 2

L2 Linker

sorry for bringing this old thread up again but I am currently facing the exact same thing. Have you managed to find a solution?

 

Hi,

 

sorry, never found a solution for this problem.

  • 2775 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!