NAt problem with paloalto

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

NAt problem with paloalto

L3 Networker

Hi,

i have 3 zone trust untrust and dmz

dmz:91.239.204.0/24

trust:10.0.0.0/8

untrust: anything 

when i try to nat from untrust to trust 91.239.204.22--->10.1.1.34 packet goes to dmz interface...i think problem is nat before routing or routing before nat because dmz and nated interface same subnet group...

How can i resolve this problem.?

1 accepted solution

Accepted Solutions

L3 Networker

Hi

i fixed  this problem with uturn nat...

regards

View solution in original post

2 REPLIES 2

L5 Sessionator

So the traffic ingresses  the firewall from the DMZ interface ?

Is there a reason why we need to continue using overlapping subnets in the same Virtual Router?

Can you please add the o/p of the following

>show interface logical

>show routing route

-Ameya

L3 Networker

Hi

i fixed  this problem with uturn nat...

regards

  • 1 accepted solution
  • 2637 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!