12-17-2021 12:41 PM
Hello,
I'm attempting to setup a few remote sites to a Hub site all sites have a Palo Alto 3260 firewall. All remote sites have the same internal IPs and subnets on the Trusted side and I'm needing to connect all sites using a IPSEC VPN. I would like to Source NAT but cannot find the documentation to assist in setting this up using IPSEC. Also, would like to use OSPF with the Source NAT, if possible. Any assistance would be very helpful. Thank you, David
12-17-2021 02:04 PM
Hello,
Here are a few articles that talk about this when you have overlapping subnets via VPN.
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClSGCA0
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClNxCAK
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClipCAC
Hope this helps.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
