03-23-2018 05:05 AM
Hi
We have imported a config from a PA500 into a newly installed VM-100 v8.1 (under vmware). After having done some VLAN changes to interfaces, we suddenly started to get the below error message when committing:
Can someone point us in the correct direction to look for the culprit..?
Thanks a lot 🙂
regards Tor
03-23-2018 07:21 AM
It looks like part of your configuration may have mentioned a Virtual Router that is not present in your VM-100. I would check that you actually have those matching up with what you had on the PA-500. If everything matches, attempt to remove any mention of anything that isn't set to VR "default" until you've actually committed the new VR and try to add it back in; it could be that the config is trying to validate the new VR reference before it actually "knows" about it.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
