- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
07-26-2020 10:42 PM
Hi community,
I need to forward all traffic and threat logs to a log collector.
I understand most of the process except the security policy part.
Once I create a syslog server profile and then a log forwarding profile, I then need to use that log forwarding profile in my security policy.
Our firewalls have many rules and my only instructions have been "please forward all traffic and threat logs to our log collector".
How best do I do this? Do I manually set the log forwarding profile of every rule to the one I created?
Or do I create a new rule? If I create a new rule, what options do I set? Do I put both source and destination address as "any"? everything else as any?
Sorry about sounding confused but I appreciate any help.
Thank you.
07-27-2020 04:46 AM
Hi @damom10 ,
You'll need to add the profile to all your existing rules.
DO NOT create an ANY ANY ANY rule unless you want to open all the gates 🙂 !!!
Check out the following discussion that talks about this exact topic. It might give you some ideas on how to best approach this :
Cheers !
-Kiwi.
07-27-2020 04:46 AM
Hi @damom10 ,
You'll need to add the profile to all your existing rules.
DO NOT create an ANY ANY ANY rule unless you want to open all the gates 🙂 !!!
Check out the following discussion that talks about this exact topic. It might give you some ideas on how to best approach this :
Cheers !
-Kiwi.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!