NFS monitor interval on panorama

Showing results for 
Show  only  | Search instead for 
Did you mean: 

NFS monitor interval on panorama

L4 Transporter


Anyone know the monitor interval of nfs on panorama?

In my case, there is a cluster which include 2 nfs server, everytime when the nfs cluster faliover were happened, the panorama will restart itself to change logdb, I found that all the time of nfs cluster failver should take 50 to 90sec, it would be taken too long time to complete nfs failver process for panorama, so panorama can not reach nfs that will restart itself.

In addition, is there any way to change the default interval monitor vaule?





L7 Applicator

It looks like the interval  is not configurable only an on/off mode.

Known Issues When Using NFS Logdb on Panorama

Panorama Reboot when Unmounting NFS Partition

Panorama NFS Errors

Steve Puluka BSEET - IP Architect - DQE Communications (Metro Ethernet/ISP)
ACE PanOS 6; ACE PanOS 7; ASE 3.0; PSE 7.0 Foundations & Associate in Platform; Cyber Security; Data Center
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!