Non logging issue

[Brinkman]

OK a little background first I'm running 4.1 on a 5050 pair in A/P.  I have a server that is trying to do 80 and 443 out to a specific address and we have some logging wierdness going on.  If we don't have a rule in place allowing the traffic it will not show up with a log entry.  If I do a packet capture I see it in the receive stage but not any other stage.  At the very least I would expect to see it in the drop stage, also, it isn't showing up in any of the logs or being sent to our syslog server.  If I have a rule in place allowing the traffic it will show up in the logs.  I have verified that my any,any,deny at the end of the ruleset is logging at both the start and end of the session and I'm still not seeing anything.  We are using the Anti-Spyware and Vulnerability protection but it currently is only setup in alert mode so it shouldn't be blocking.  Also, I have tried connecting with different ports just to make sure it wasn't a specific application issue and that has no effect.

Any help is appreciated.

Kris

[panos]

why do you use icmp ?

to be sure why not logging before you need to compare output of

show rulebase security rules 146

completely

[Brinkman]

Someone else set it up and I just inherited this rulebase, still don't have it completely cleaned up.

I don't know how they created it though.