Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
06-18-2013 07:09 AM
OK a little background first I'm running 4.1 on a 5050 pair in A/P. I have a server that is trying to do 80 and 443 out to a specific address and we have some logging wierdness going on. If we don't have a rule in place allowing the traffic it will not show up with a log entry. If I do a packet capture I see it in the receive stage but not any other stage. At the very least I would expect to see it in the drop stage, also, it isn't showing up in any of the logs or being sent to our syslog server. If I have a rule in place allowing the traffic it will show up in the logs. I have verified that my any,any,deny at the end of the ruleset is logging at both the start and end of the session and I'm still not seeing anything. We are using the Anti-Spyware and Vulnerability protection but it currently is only setup in alert mode so it shouldn't be blocking. Also, I have tried connecting with different ports just to make sure it wasn't a specific application issue and that has no effect.
Any help is appreciated.
Kris
06-18-2013 01:18 PM
Someone else set it up and I just inherited this rulebase, still don't have it completely cleaned up.
I don't know how they created it though.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
