OID for CPU/MEMORY on PAN 5050

cancel
Showing results for 
Search instead for 
Did you mean: 

OID for CPU/MEMORY on PAN 5050

L3 Networker

I'm looking for an OID to use for monitoring the CPU/MEMORY utilization with my NMS system. My MIB walk didn't turn up anything useful.

Thanks,

1 ACCEPTED SOLUTION

Accepted Solutions

L6 Presenter

Rob,


Paloalto follows both HOST-RESOURCES-MIB and RFC1213 MIB.


5050 has a management plane cpu (mp) ,2 dataplane cpus (dp-0 and dp-1)


OIDs for cpu usage are as follows for each of these processors

mp - 1.3.6.1.2.1.25.3.3.1.2.1

dp-0- 1.3.6.1.2.1.25.3.3.1.2.2

dp-1-  1.3.6.1.2.1.25.3.3.1.2.3


The result of your query is CPU load average for the last 60 secs.


check this out


https://live.paloaltonetworks.com/docs/DOC-1744

also this link for host-resources-mib


HOST-RESOURCES-MIB SNMP MIB



View solution in original post

8 REPLIES 8

L6 Presenter

Rob,


Paloalto follows both HOST-RESOURCES-MIB and RFC1213 MIB.


5050 has a management plane cpu (mp) ,2 dataplane cpus (dp-0 and dp-1)


OIDs for cpu usage are as follows for each of these processors

mp - 1.3.6.1.2.1.25.3.3.1.2.1

dp-0- 1.3.6.1.2.1.25.3.3.1.2.2

dp-1-  1.3.6.1.2.1.25.3.3.1.2.3


The result of your query is CPU load average for the last 60 secs.


check this out


https://live.paloaltonetworks.com/docs/DOC-1744

also this link for host-resources-mib


HOST-RESOURCES-MIB SNMP MIB



View solution in original post

L3 Networker

mp - 1.3.6.1.2.1.25.3.3.1.2.1 ----- value = 0.0

dp-0- 1.3.6.1.2.1.25.3.3.1.2.2 ----- value = 1

dp-1-  1.3.6.1.2.1.25.3.3.1.2.3----- value = not supported

Hrm, can't seem to get it to work. Any tricks that I should know about?

I take that back, it is working! Thank you very much!

For me also it is not working. May i know how you get it worked

PCNSE-7, ACE-6,ACE 7 , CCNP, CCNA,CCIE(theory) , RHCE
Firewalldog dot com

What exactly does not work?

 

SNMP community set correctly?

Firewalls between the one you want to monitor and your monitoring server allows snmp traffic?

When I test with OID for 5050 devices below are the results:

OID: 

Data plane -0- 1.3.6.1.2.1.25.3.3.1.2.2

12.jpg

When I test with OID : 

Data plane -1-  1.3.6.1.2.1.25.3.3.1.2.3

I am getting below error:

 

13.jpg

 

So I suspsect the OID"

Data plane -1-  1.3.6.1.2.1.25.3.3.1.2.3"  is not working 

 

For 5050 like 2 data planes , are there 2 OIDs require or with single OID will it show average value of all cores in 2 data planes?

 

PCNSE-7, ACE-6,ACE 7 , CCNP, CCNA,CCIE(theory) , RHCE
Firewalldog dot com

There is only 1 average value for all cores/dataplane-processors.

--> 1 OID for MP CPU and 1 for DP CPU(s)

@vsys_remoSo which means for data plane this OID only valid: Data plane -0- 1.3.6.1.2.1.25.3.3.1.2.2 ?

I have seen some reference for tfor Data plane -1- 1.3.6.1.2.1.25.3.3.1.2.3

Was it removed or is there any reference to say only one OID for devices like 5050 where mutiple data planes are used

PCNSE-7, ACE-6,ACE 7 , CCNP, CCNA,CCIE(theory) , RHCE
Firewalldog dot com
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!