06-17-2022 06:47 AM
Can someone walk me through redistribution of OSPF into BGP and BGP into OSPF
I am setting up a new VSYS (already done) with a new Virtual Router to an AT&T AVPN WAN
There is a /30 between us and AT&T, and we use eBGP to AT&T. On the other router interface, we use OSPF everything in area 0.
Probably no very good reason to clean this up being this is all private IP stuff, but it's a habit.
How do redistribute the OSPF and BGP into one another?
Also, how do I deal with the route-map that sets the community?
router ospf 1
redistribute bgp 64xxx
network 10.x.x.x 0.0.0.0 area 0 (this is a loopback IP)
network 192.168.x.x 0.0.0.7 area 0
router bgp 64xxx
neighbor 10.y.y.y remote-as 13xxx (This is in a /30 with ATT)
network 0.0.0.0 route-map ATT_LTE
network 192.168.x.x mask 255.255.255.248 (This is the same subnet as the one above in OSPF)
network 192.168.72.0 mask 255.255.252.0 route-map ATT_LTE
redistribute ospf 1 match internal external 1 external 2
neighbor 10.y.y.y activate
neighbor 10.y.y.y send-community
neighbor 10.y.y.y soft-reconfiguration inbound (all of these are the same as in the neighbor string)
ip address 10.161.191.71 255.255.255.255
route-map ATT_LTE permit 10
match ip address prefix-list ATT_OUT
set community 13xxx:6655
ip prefix-list ATT_OUT seq 5 permit 192.168.72.0/22
ip prefix-list ATT_OUT seq 10 permit 0.0.0.0/0
06-17-2022 06:47 PM
There is not exact "step1, step2" type of guide, but maybe reading this, will give you some ideas.
06-22-2022 05:57 AM
Shouldn't Premium Partner support cover this? I am told that does not cover technical support except break/fix. Can you let me know.
06-23-2022 04:47 AM
Thank you for your email. For many partners, their ASC (auth support centers) are contractually bound to provide ONLY break fix, which aligns to what TAC offers. That being said, there are some ASC or other PANW resellers that offer Professional Services.
What you really asking for, thinly veiled, is configuration assistance, which is really Professional Services, according to some vendors.
What I would really recommend, if you are not comfortable in performing the steps, is to contact your reseller or local PAN SE and see how much PS would be for say, 2 days of PS. The investment made may outweigh the level of effort needed to perform this on your own successfully.
What other questions can we answer?
06-23-2022 11:22 AM
I think I actually have it configured correctly only need to test it at this point.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!