own system logs on/from log collector.

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Palo Alto Networks Approved
Palo Alto Networks Approved
Community Expert Verified
Community Expert Verified

own system logs on/from log collector.

L0 Member

how to find own system/config logs from log collector on log collector.

how to find own system/config logs from log collector on log collector.
Device is m-300 and PANOS 9.1.12

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

Thank you for the post @cemalserin

 

For the System logs, you can get it from Panorama Manager by going to: Monitor > Logs > System, then you can filter logs based on Log Collector's Name or Serial Number. For example: ( device_name eq <Log Collector Name> ) or ( serial eq <Serial Number>). For more detailed System logs, you can get it from Log Collector's CLI: tail lines 500 mp-log ms.log

 

For the configuration logs, you can get it from Log Collector by going to CLI and issue: tail lines 500 mp-log configd.log

 

BTW, you mentioned you have M-300 running 9.1.12. Based on documentation, M-300 can only run 10.2 as of now.

 

Kind Regards

Pavel Kucera

Help the community: Like helpful comments and mark solutions.

View solution in original post

3 REPLIES 3

Cyber Elite
Cyber Elite

Thank you for the post @cemalserin

 

For the System logs, you can get it from Panorama Manager by going to: Monitor > Logs > System, then you can filter logs based on Log Collector's Name or Serial Number. For example: ( device_name eq <Log Collector Name> ) or ( serial eq <Serial Number>). For more detailed System logs, you can get it from Log Collector's CLI: tail lines 500 mp-log ms.log

 

For the configuration logs, you can get it from Log Collector by going to CLI and issue: tail lines 500 mp-log configd.log

 

BTW, you mentioned you have M-300 running 9.1.12. Based on documentation, M-300 can only run 10.2 as of now.

 

Kind Regards

Pavel Kucera

Help the community: Like helpful comments and mark solutions.

Community Team Member

Hi @cemalserin ,

 

In order to get better traction for this, I have moved your post to the General Topics area, as the Feedback area is only for feedback to the LIVE community. 

I would recommend that you visit the General Topics area to see and follo up on your discussion.

 

Cheers,

-Kiwi.

LIVEcommunity team member, CISSP
Cheers,
Kiwi
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

L0 Member

Thank you @PavelK 

we have two M-600 appliance, M-300 is wrong information. 3 weeks ago one of both not reachable not pingable. Panorama hadn't shown any logs from either. we both had to restart.

I want to hide lines in ms-log. less patterns (slash, execution mark )  and grep invert-match pattern doesn't work.

  • 1 accepted solution
  • 2706 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!